ISA - UV/Vis Spectrometer System
[BlueBox TS - in situ]
|
Technical data
◆ System：UV/Vis spectrum 200 - 720 nm ◆ Measuring principle：Spectral analysis ◆ Optical measuring path length：0.5 - 20 mm ◆ Sampling rate：≥ 3 s ◆ Light source：Xenon pulse light ◆ Operation temperature range ：0 °C to +110 °C ◆ Dimensions：Length approx. 230 mm; Ø 44 mm ◆ IP protection class ：IP 68 Interfaces ◆1x RS-232, RS-485, var. protocols e.g. Modbus ◆1x CAN bus for connection of additional modules, sensors & actuators ◆1x Ethernet [TCP/IP], Modbus [TCP/IP] Inputs ◆2x Pulse-In (PNP/NPN selectable) Outputs ◆2x Current output 4-20 mA ◆2x Relay with a switching capacity of 48 V AC/DC; 0,5 A Parameters
■ Ammonium ■ Biochemical oxygen demand (BOD) ■ Chemical oxygen demand (COD) ■ Total organic carbon (TOC) ■ Total suspended solids (TSS) ■ Nitrate ■ SAC 254nm * Further parameters with application specific calibration |
BlueConnect Module
|
The BlueConnect module enables the conversion of physical and chemical sensors into the digital world and the easy connection to a BlueBox System.
BlueConnect Module Sensor Input & Configuration ◆ Channel 1: Sensor input DO galvanic pH ISE GO Modbus Sensors ◆ Included interfaces Modbus RS485 CAN Bus |
BlueSense transduce
|
Basis configuration:
Input card channel 1: selectable option Input card channel 2: selectable option Inputs: 2x digital in (static), potential free contacts 2x pulse in PNP / NPN switchable (optionally: static) Outputs: 2x analogue outputs 4-20 mA 2x relays, potential-free contacts, 230 VAC, 2A 2x relays, potential-free closing contact, signaling contact Display features: LCD-touch display: 240x128 pixel Display of measured values Bar graphs Function keys Alarm value settings SD card slot for data recording Temperature range: -10 °C … +45 °C |
pH probe for wastewater
|
◆Application scope: wastewater
Diaphragm: sharpening Measurement range: pH 0 ... 14 Temperature range: 0 °C ... +135 °C Pressure: 0-6 bar |
Conductivity / temperature immersion sensor
|
Accuracy: 5 μS/cm or 1% FS
Resolution: 1 μS/cm Rate: >= 1 sec |
Ion-selective electrode for Ammonium
|
Technical data:
●Parameter: NH4+ ●Measuring principle: Ion-selective Electrode ●Measuring range: 0,2~18.000 mg/l ●Working temperature: 0 - 40 °C ●Max. allowed working pressure: 1 bar ●pH-range: pH 3 - pH 7 Material: plastic (black) Dimensions: length: 145 mm, diameter: 12 mm Immersion depth: 120 mm Screw plug connector with PG13.5 |
Temperature probe with protective submersible housing
|
Technical details:
Measuring principle: temperature NTC Measuring range: -4 °C ~+60 °C Accuracy: 0,3 °C, absolute Resolution: 0,1 °C Measuring interval: min. 5 sec Temperature range: -10 °C ~ -85°C |